Features and Benefits:

• Red brass construction for longer life and more rugged performance.
• Contamination-proof, self-flushing filter screen resists debris build-up. Water flow consistently flushes the screen, dislodging particles and debris before they can accumulate and clog the filter.
• Reverse flow design ensures valves fail in the closed position if the diaphragm tears or rips. Prevents flooding, water waste and landscape damage.
• Slow closing to prevent water hammer and subsequent system damage.
• One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
• Manual internal and external bleed. External bleed permits flushing debris from the system, recommended for system start up and repairs. Internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first.
• Flow control handle adjusts water flow as needed.
• Accommodates optional, field installed PRS-D pressure regulating module to ensure optimum sprinkler performance.
• Accepts latching solenoid for use with Rain Bird battery-operated controllers.
• Optional purple flow control handle for non-potable water applications (EFB-GB-NP-HAN).

Models:

• 100-EFB-CP: 1" (26/34)*
• 125-EFB-CP: 1 1/4" (33/42)
• 150-EFB-CP: 1 1/2" (40/49)*
• 200-EFB-CP: 2" (50/60)*
  *Available with BSP threads
  
• Note: Valve and PRS-D module must be ordered separately.
• Note: Purple flow control handle must be ordered separately.
  

1. Rain Bird recommends flow rates in the supply line not to exceed 7.5 ft./sec. (2,3 m/s) in order to reduce the effects of water hammer.
2. For flows below 5 GPM (1,14 m³/h; 0,32 l/s) Rain Bird recommends use of upstream filtration to prevent debris from collecting below the diaphragm.
3. For flows below 10 GPM (2,27 m³/h; 0,63 l/s) Rain Bird recommends the flow control stem be turned down two full turns from the fully open position.

Specifications:

• Pressure: 15 to 200 psi (1,0 to 13,8 bar)
• Flow: 5 to 200 GPM (1 to 45 m³/h; 0,32 to 12,60 l/s)
• Temperature: up to 150° F (66° C)
• 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
• 0.41 A (9.8 VA) inrush current; 0.28 A (6.7 VA) holding current
  Solenoid coil resistance: 24 Ohms, nominal

Dimensions:
H x L x W

• 100-
  EFB-CP 6" (15,2 cm) x 4 1/2" (11,4cm) x 3 1/4" (8,3 cm)
  
• 125-
  EFB-CP 5 3/4" (14,6 cm) x 5" (12,7 cm) x 3 1/4" (8,3 cm)
  
• 150-
  EFB-CP 6 1/2" (16,5 cm) x 5 1/2" (14 cm) x 4 1/2" (11,4 cm)
  
• 200-
  EFB-CP 6 3/4" (17,1 cm) x 7" (17,8 cm) x 5 3/4" (14,6 cm)
  
  Note: The PRS-D option adds 2" (5,1 cm) to the valve height.