K-Rain 1553 Pump Start Relay - Three Phase up to 10 HP Pump

K-Rain 1553 Pump Start Relay - 24V x 115 or 230V 3 Phase
Price Breaks at 2-4-6-10 and 15 Relays!

Was Is

K-RAIN - FURTHER INFO

Warning: this Relay can be used with 3 Phase Electric Power found in industrial applications.

This PSR is intended for use with an irrigation controller sending a 24 volt pump start current to the pump start relay and operating either a 115 Volt Pump up to 3 Horsepower or a 230 volt pump up to 10 Horsepower and is appropriate for use with special industrial 3 phase electric current. Be careful when ordering; non-industrial pumps do NOT use 3 phase electric power. This relay is intended for INDUSTRIAL USE.

Coil Specifications THREE PHASE OPERATION

24 VAC, 60 Hz Triple Pole, Single Throw

Inrush: 60 VA Inductive: 20 Amp

Sealed: 7.0 VA, 2.7 Watts Resistive: 30 Amp

Resistance: (±10%): 210 OHMS Input: 120 VAC – up to 3 H.P.

240 VAC – up to 10 H.P.

Features and Benefits

Industrial, Rain, Tight, Secure Rustproof Enclosure - Industrial – grade enclosure ensures long product life and deters tampering.
U.L. Approved – Ensures the relays are approved for their intended use.
Large Easy Access Enclosure – Provides easy accessibility during wiring.
Enclosure has 8 Recessed Knock-Outs – Provides easy connections from any direction.
24 VAC Coil – Provides for a variety of applications up to 3 HP for a pump running on 115 volts or up to a 10 HP pump using 240 volts 3 phase electric current.
Plastic Inset Cover Screws – Provides extra system security, reduces liability and deters tampering.

Pump Start Relay

The Pump Start Relay enclosure is constructed with a corrosion resistant, UV resistant and shockproof material. The rain-tight, secure, rustproof enclosure provides a safe and secure connection in a housing built to last.

K-RAIN-1553
Weight: 4.20 lbs