The WX-101 Well Pressure Tank Diameter is 8 inches wide x 12.6 inches tall and this tank has a male threaded three-quarter inch screw-on male threaded bottom inlet. The WX-101 Tank has equal specifications and is a direct replacement for all tank brands and models listed at bottom of page*
Drawdown (before pump kicks on) is .78 gallons with a 20-40 pressure switch, .65 gallons with a 30-50 pressure switch and .57 gallons with a 40-60 pressure switch.
The WX-101 tank is equivilent in performance to a 5 gallon galvanized (non-bladder) tank, with an actual tank water volume of 2.0 gallons.
The WX-101 tank has a factory pressure charge of 38 lbs psi and maximum working pressure is rated for 150 lbs psi. Regardless of what tank brand or size you install, your tank bladder pressure must be adjusted to your pressure switch situation at time of tank installation in order for your well system to operate correctly. Follow link provided for tank installation and pressure adjustment instructions.
Note - Depending upon availability of the Amtrol Well-X-Trol WX-101 in stock, we may ship the equivilent quality Flexcon tank in order to achieve same day or next day shipment. The Flexcon JR6 tank is the same exact design, equal in price, size, performance, specifications, quality and guarantee. Please note in comments if you want Well-X-Trol only.
Notice - Our entire stock of Flexcon H2o, Well-X-Trol and Flexcon Challenger tanks all contain Diaphragms now instead of "bladders" for longer service life.
WELL-X-TROL® redefined the industry in 1963 as the first pre-pressurized well tank. Today, Well-X-Trol Professional series tanks continue to deliver unparalleled performance and longevity, making them the most recognized brand on the market. With its sealed air charge and unique water chamber design, Well-X-Trol remains the choice of professionals.
WELL-X-TROL Professional offers more options and sizes than any other well tank manufacturer including vertical, horizontal, in line, and underground in sizes ranging from 2 gallons to 119 gallons. Whether new installation or replacement, there's a WELL-X-TROL Professional to meet every need.
WELL-X-TROL Professional tanks were the first to meet all industry standards for quality and safety. The butyl diaphragm in all models meets EPA requirements for potable water as defined in the Safe Drinking Water Act of 1986. The entire tank which includes the virgin polypropylene liner, butyl diaphragm, and acceptance fittings for a 100% corrosion resistant water reservoir is listed by NSF International Standard 61.
• High-strength steel shell offers max working pressures to 125psi
• Virgin polypropylene inner liner will not crack, chip, flake or peel
• Thick butyl rubber diaphragm offers the lowest permeability of any material used today and will not support bacterial growth
• Diaphragm design will not collapse or tear like older tank bladder designs
*The Well-X-Trol WX-101 is a direct replacement for the H2Pro PJR6, H2Pro JR6, Challenger PJR6, Challenger JR6, Well-Rite PJR6, Well-Rite JR6, Wel-Flow WF6, Champion CM1001, How 2 Tank HT2, Goulds A O Smith V6P, State Perma Tank PIL-2 and Well Mate WM8L tanks.
Questions? Call us at 352-573-7531 for valid answers.
WX-101
Weight: 10.00 lbs
|
