|
The Rainbird 1800RETRO Permits convenient conversion from sprinkler head to drip tubing when used with compression adapter. Provides 30 lbs psi pressure regulation and 200 mesh filtration screen that is easily accessible for cleaning. This internal filter and pressure regulator assembly drops quickly and easily into any Rainbird 1804, 1806 or 1812 spray head to easily retrofit system to Xerigation products. Note - if total watering station flow (after retrofit) is less than 3 gpm, replace the regular irrigation solenoid valve with a Rainbird Low Flow Drip-Mist Control Valve.
Features and Benefits:
- Permits convenient conversion to drip tubing when used with compression adapter.
- Provides 30 psi (2,0 Bars) pressure regulation and 200-mesh (75 micron) screen that is easily accessible.
- Internal assembly drops into any 1804, 1806, or 1812 spray head body to easily retrofit existing system to Xerigation products.
- Can be installed above or below grade.
- If retrofit flow is less than 3 GPM, replace electronic valve with Rain Bird Control Zone Kit.
Models:
Specifications:
- Flow: 0.5 to 4 GPM (0,11 to 0,91 m3/h; 0,3 to 0,25 l/s)
- Inlet Pressure: 15 to 70 psi (1,0 to 5,0 Bars)
Dimensions:
- 1/2" (15/21) female-threaded inlet
- 1/2" (15/21) male-threaded swivel outlet
- Height: 7" (17,8 cm)
- Width: 2" (5,1 cm)
RETRO-1800
Weight: 0.58 lbs
|
