This device senses flow through a pipe and turns on a device such as a chlorinator or water treatment equipment. It is primarily used for situations where the pressure switch activates the main well pump for both irrigation and for house use. By adding a flow sensing valve it is possible to only treat water going into the home or water going only for irrigation, without wasting moey by having to treat both.
- Low Flow Operation
- Has one conection to activate electric when water is flowing through switch, and a second alternative connection that will shut off electric when water flow is present.
- Simple to install - Readily (PVC Cement) installs into one inch PVC pressure line - power from wall plug or a well pressure switch (use continuous power terminals) - easy to follow instructions
- Up to 15 amp capacity
- Standard One Inch PVC Slip Fittings In and Out
- Operates Line Pressures Up To 60 LBS PSI
- Temperatures Up To 110 Degrees Continuous
- Wetted Surface - PVC, Poltpropylene, Buna N, Stainless Steel
- One inch (PVC Slip) inlet and outlet are clearly marked - simply cements onto one inch PVC pipe
- Optional - prewired Plug Box has one plug (lower plug) which provides continuous power for auxilary uses, and one plug (upper plug) which is activated (or deactivated) by flow of water through switch assembly. Water flowing through switch automatically turns on (or turns off) upper plug electricity.
- Flow switch MUST be mounted level (horizontal to floor or ground). Note - Flow Switches purchased without optional Plug Box do require some wiring by customer. Instructions provided.
GRIDCONSENSOR
Weight: 1.30 lbs
|
