Please provide:

Name:______________________________________________

EMail Address:_______________________________________

Well Pump Type:________Sub (pump is underground) or ________ Centrifugal (pump is above ground)

Horsepower (can be approximate)_______ (a plate on the pump can provide this info if it is still readable)

Estimated Maximum Flow Rate:___________ Gallons Per Minute (see instructions below)

To calculate Flow Rate, manually turn on the largest (most heads, lowest pressure) watering station you have in terms of water use, then count 4 gallons per minute for each rotor head and 1 gallon per minute for each spray head on that watering station, adding an extra 1 gallon per minute for each full circle spray head.  Enter that total above.

Size of pipe going from the pump to the sprinkler control valves:  ____1 inch or smaller   ____1 1/4 Inch   ____1 1/2 Inch   ____2 Inch

Will your proposed injection system (tank and pump) be placed in a protected weatherproof area?  ____Yes   _____No

Send your sample and all information requested to (print out and use for shipping label):

Lubee's Irrigation, Inc.

2160 Mariner Blvd

Spring Hill, Fl  34609

Please use an expendable container for your sample. we do not return the containers.